Position:Home > News

How to operate the lifting electric furnace correctly

Time：2021-05-08

Today I received a call from a school customer, mainly about how to operate the lifting electric furnace, and which operations are incorrect. Since we just purchased our lifting electric furnace, many operations are not very familiar, so our technology addresses these problems. Give the user a detailed answer, the specific questions and answers are as follows:

1. Can it be used for a long time at the temperature marked on the manual of the lifting electric furnace?

Answer: It can not be used for a long time at the rated temperature, so it is easy to damage the heating element, and it can be used for a long time at a temperature of more than 50 degrees below the rated temperature.

2. Can you add more materials at once? This can increase production efficiency.

Answer: Do not load too much material, otherwise it will affect the heat treatment effect, and if too much, it is easy to touch heating elements and thermocouples. Both of these devices are fragile products, and they will be broken if accidentally touched. You have to replace it with a new one.

3. Can items that melt at high temperatures be directly placed in the furnace for heat treatment?

Answer: No, because the objects may flow around after being melted at high temperature, which may cause sticking to the furnace. Use a special crucible for storage.

Prev:Introduction of high temperature box furnace

Next:What are the corrosion effects of tube furnace tubes?

How to operate the lifting electric furnace correctly

Single-Zone Tube Furnace

Multi-Zone Tube Furnace

Rotary Tube Furnace

Vertical Tube Furnace

Slideway Tube Furnace

RTP fast Annealing Furnace

Lab Scale Pyrolysis Furnace

Diffusion Oxidation Tube Furnace

Ultrasonic Spray Pyrolysis Furnace

High temperature high pressure

OLED material purification

400℃-1200℃ Box Furnace

1300℃-1400℃ Box Furnace

1500℃-1700℃ Box Furnace

Bell Type Furnace

Crucible Furnace

Bogie Hearth Furnace

CVD Furnace System

PECVD Furnace System

Roll-to-roll graphene film growth equipment

LP/AP CVD System

Coating equipment

Vacuum Sintering Furnace

Vacuum Annealing Furnace

Vacuum Brazing Furnace

Vacuum Tempering Furnace

Vacuum Hot Pressing Furnace

Vacuum Gas Quenching Furnace

Vacuum Carbon Tube Furnace

400℃-1200℃

1300℃-1400℃

1500℃-1700℃

Custom Vacuum Furnace

Custom Box Furnace

Custom Tube Furnace

Zirconia Sintering Furnace

Porcelain Press Furnace

Vacuum Porcelain Furnace

Dental Dewaxing Furnace

Vacuum System and Gas Mixing System

Reactors

Induction Furnace

Vacuum Oven

Accessories and Consumables