Kejia Bottom loading Muffle furnace price

KJ-BLM1600-64LZ Bottom loading Muffle furnace

Model：KJ-BLM1600-64LZ

Description：

KJ-BLM1600-64LZ Bottom loading Muffle furnace mainly used in university laboratories, industrial and mining enterprise laboratories, for chemical analysis, physical measurement, sintering and dissolution of metals, ceramics, etc., heating, roasting, and h

Introduction:
KJ-BLM1600-64LZ Bottom loading Muffle furnace mainly used in university laboratories, industrial and mining enterprise laboratories, for chemical analysis, physical measurement, sintering and dissolution of metals, ceramics, etc., heating, roasting, and heat treatment of small steel parts.

This KJ-BLM1600-64LZ furnace consists of a bottom loading muffle furnace, high-quality alumina fiber and MoSi2 rod heating elements. The inner cavity is heated on all four sides, and the temperature uniformity is good; the compact furnace cavity has a lifting tray and the furnace bottom can be raised and lowered. This high-temperature box furnace is an ideal equipment for annealing and sintering materials in research laboratories.

Bottom loading furnace picture

Technical parameters：

Model	KJ-BLM1600-64LZ
Furnace structure	Double layer steel casing with dual cooling fan, temperature of furnace shell below 60deg.C.
Furnace liner	Two layers of ceramic fiber insulation materials First layer: 1800deg.C ceramic fiber board Second layer: 1600deg.C ceramic fiber board
Sealing	An airtight tank to keep special gas in the furnace With gas inlet port and outlet port.
Chamber dimension	400 X 400 X 400mm
Working temp.	≤1600℃
Heating rate	0-25℃/min (Suggestion: 0-10℃/min)
Temp. accuracy	+/-1℃
Thermocouple	B-type thermocouple
Temp. control	PID automatic control via SCR (Silicon controlled rectifier) Power control with phase angle fired, current limiting resistor 30 programmable segments for precise control Bulit-in PID auto-tuned function with overheating & broken thermocouple broken protection. Over temperature protection and alarm allows for operation without attendant
Heating element	MoSi2 heating rods
Working voltage	480V, 60Hz, Three phases
Power	25 kW
Lifting tray	speed of door up/down lift 80-100mm/second extension cable and up/down button handle