Touch screen three temperature zone tube furnace

Description：

Each temperature control system is adjusted in PID mode, and 30 steps of temperature rise and fall programs can be set. The K-type thermocouple is used for temperature measurement and control, and its temperature control accuracy can reach +/- 1℃.

Product Introduction:
The touch-screen three-temperature zone tube furnace is a three-temperature zone open tube furnace that has passed CE certification. Each temperature zone is separately controlled by three independent temperature control systems. For the temperature, four-stage temperature gradient can be formed in the heating zone or a longer constant temperature zone can be formed. Each temperature control system is adjusted in PID mode, and 30 steps of temperature rise and fall programs can be set. The K-type thermocouple is used for temperature measurement and control, and its temperature control accuracy can reach +/- 1℃.

Technical Parameter:

product name	Touch screen three temperature zone tube furnace
Product number	KJ-T1200-L3015-KQ
Furnace material	Furnace uses alumina polycrystalline fiber
Furnace tube size	Φ30×1400mm
Heating zone	Three temperature zone heating, each temperature zone 300mm
Furnace tube material	Quartz furnace tube
Operating temperature	1100°C
Maximum temperature	1200°C
Temperature control accuracy	±1℃
Temperature control method	Touch screen control, independent temperature control of three temperature zones, each temperature zone can realize intelligent 30-segment PID programmable control, with over-temperature and burnout protection functions
Flange joint	Equipped with two stainless steel vacuum flanges, mechanical pressure gauge has been installed
Sealing system	The furnace tube and flange are extruded and sealed with a silica gel O-ring, which is convenient to remove and can be removed repeatedly, and has good air tightness. Gases such as argon and nitrogen can be vented.
Heating rate	0-10℃/min
Heating element	Resistance wire
Operating Voltage	AC220V 50Hz
Temperature measuring element	3 K-type thermocouples, independent temperature control
Vacuum	Pre-evacuated to -0.1MPa (value of vacuum pressure gauge)
Provide related accessories	Crucible tongs, high temperature gloves, thermocouple, furnace plug, manual, warranty card, etc.
After-sales service	12-month warranty and lifetime warranty (except vulnerable parts)