Micro Sublimation Tube Furnace_Zhengzhou Kejia Furnace

Micro Sublimation Tube Furnace

Description：

This set of equipment consists of 1 mini tube furnace, 2 gas scrubbers, and 1 micro vacuum pump. It can be used in combination to carry out various sublimation tests, and can also be easily disassembled for various experimental scenarios.

Introduction: This set of equipment consists of a mini tube furnace, 2 gas scrubbers, and a micro vacuum pump. It can be used in combination to carry out various sublimation tests, and can also be easily disassembled for various experimental scenarios.

Applications:
This set of equipment is specially developed for the determination of industrial melamine content using the sublimation method; it can also be disassembled and used separately, and is suitable for sublimation, roasting, Sintering, heat treatment, brazing and other experiments.

Features:
Miniaturized design, small footprint.
Accurate temperature control, fast heating speed and high work efficiency.
It can be vacuumed and shielded gas can also be passed.
It can be used as special equipment or general equipment.

Product name	Micro Sublimation Tube Furnace
Model	KJ-TG1200-S50LK1
Max.temperature	≤1200℃
Working temperature	≤1100℃
shell structure	Double-layer shell + air-cooled structure, electrostatic adsorption and plastic spraying treatment on the surface of the furnace body
Furnace material	Light weight alumina ceramic fiber
Heating zone length	200mm
Heating element	High-quality high-resistance alloy heating wire
Heating rate	≤10℃/min
Temperature Control System	PID mode adjustment 30-segment programmable automatic control, with over-temperature and burnout alarm function
Temperature control accuracy	± 1℃
Temperature measuring element	N-type temperature measuring thermocouple
Furnace tube material	Quartz tube
Furnace tube size	Φ50×600mm Can be customized according to customer needs
Vacuum Sealing System	A set of stainless steel vacuum-sealed flanges are equipped as standard, with stainless steel globe valves and gas nozzles installed at the gas outlet and gas inlet ends, and a mechanical pressure gauge is installed on the flange at one end; the furnace tube and the flange are squeezed and sealed with a silicone O-ring
Vacuum pump	Unipolar mechanical vacuum pump, pumping speed 2L/S, ultimate vacuum ≤ 5Pa
Wash bottle	Experimental grade quartz glass material, volume 1L, rubber stopper, equipped with L-shaped glass quartz tube
inflatable body	Inert gas to slight positive pressure (less than 0.02MPa)
other sizes available
Heating zone size（mm）		Heating zone size（mm）
Φ25×200		Φ100×300
Φ30×200		Φ50×400
Φ40×200		Φ60×400
Φ50×300		Φ80×400
Φ60×300		Φ100×400
Φ80×300		Φ120×400
More sizes can be customized