English
简体中文
Русский язык
Français
日本語
한국어
Português
Español
Website navigation
Position:
Leave A Message
E-mail:
Tell:
Whatapp:
Address:Room 1505, Building 9, No. 26 Dongqing Street, Zhengzhou High-tech Industrial Development Zone
Tel Number
180-3717-8440
Introduction:
The Kejia Vacuum tube hot press furnace is designed for making dense compound materials under both vacuum and high pressure up to 5 tons. It is integrated with a split vertical tube furnace with a vacuum-sealed 100mm-diameter quartz tube and 5000Kg digital electric press, as well as one set of graphite pressing poles.
The furnace can be heated up to 1000°C using a temperature controller with 30 programmable segments.
Parameters:
The Kejia Vacuum tube hot press furnace is designed for making dense compound materials under both vacuum and high pressure up to 5 tons. It is integrated with a split vertical tube furnace with a vacuum-sealed 100mm-diameter quartz tube and 5000Kg digital electric press, as well as one set of graphite pressing poles.
The furnace can be heated up to 1000°C using a temperature controller with 30 programmable segments.
Parameters:
| Max. Pressure | 5ton | |
| Digital Electric Press | Built-in a digital electric press with Max. load capability of 5 tons on the bottom of the furnace. |
|
| Pressure adjustment range: | 0.1-5 T adjustable with constant pressure function | |
| Travel distance: | 20 mm | |
| Furnace structure | Splittable vertical furnace | |
| Heating element | Ni-Cr-Al resistance wire | |
| Max. working Temp | 1000°C (< 60 minutes) | |
| Max. Heating Rate | < 10°C/minute | |
| Temperature control | 30 segment programmable controller with +/-1ºC accuracy | |
| Heating Zone Length | 12" (300mm) | |
| Constant temperature zone | 100mm | |
| Quartz Tube & Sealing Flange | One quartz tube 100 OD x 94 ID x 640L mm (4" x 25") is included. |
|
| Water-cooled flanges are installed on two ends of the tube with a KF-25D vacuum port & pressure gauge as well as a 1/4" gas inlet port with an SS304 needle valve. | ||
| Flow bigger than 12L/minute is required, and using an optional recirculating water chiller to save water is highly recommended. | ||
| Warranty | One-year limited standard warranty, (Consumable parts like graphite die do not have any warranty.) | |
