English
简体中文
Русский язык
Français
日本語
한국어
Português
Español
Website navigation
Position:
Leave A Message
E-mail:
Tell:
Whatapp:
Address:Room 1505, Building 9, No. 26 Dongqing Street, Zhengzhou High-tech Industrial Development Zone
Tel Number
180-3717-8440
Brief Description:
KJ-LVP liquid-vaporizing system for lab scale CVD or DLCVD, which can work with common liquids, such as ETOH, water, etc.
Parameters:
KJ-LVP liquid-vaporizing system for lab scale CVD or DLCVD, which can work with common liquids, such as ETOH, water, etc.
Parameters:
| Power supply | 220V 50Hz 2200 W Power consumption 110V is available with a transformer |
| Liquid Flow Control | Precision digital control with +/- 0.5% FS accuracy Flow rate arrange : 0 - 10 ml/minute adjustable ( min. rate: 0.1 ml/min ) |
| Heater & Temperature controller | Liquid and carrying gas go through an SS316 coil, which is heated by a built-in small furnace up to 550℃. One heating tube is included to prevent output vapor from condensing on tube or flange ( max. temperature 200℃). The heating tube could be generated as secondary heating to prevent the liquid or gas cooling down while passing through the tube. |
| Gas flow control | Carrying gas (inert gas) is controlled by a precise float flow-meter (200 - 2000 mL/min adjustable). The optional digital mass flow controller is available at extra cost. Pressure gauge built in front panel. Two SS needle valves are installed to control gas in and out. Vapor Gas outlet tube size: 1/4"OD, SS316. |
| Size and Weight | Heater & Gas Control Unit: 390L x 420W" x 360H, mm Net weight: 5 Kg |
| Warranty | 1 year with lifetime technical support |
