Application method of high temperature trolley furnace
Usage of high temperature trolley furnace:
1. pre use inspection
Check the cooler first, and confirm that the red indicator light is not on the panel of the cooler. If the red indicator light is on, water needs to be fed from the water inlet behind the cooler. The water level of the water storage tank can be judged from the lower left corner on the side of the cooler, about 90%. After that, check whether the power control switch selection button on the control panel of the high temperature machine is reset. If not, reset it.
2. use steps
First open the furnace cover on the left side of the furnace tube, then put it into the boat, and then push the boat into the lamp tube with a pole. As long as the pole is pushed to the white mark and aligned with the seal of the lamp cover, the boat is illuminated with a flashlight after installation, and check whether the boat in the lamp tube is overweight or inclined. After inspection, plug the heat-insulating asbestos into the lamp tube and close the lamp cover.
After the above introduction, I believe you have a certain understanding of the use method and composition of the high-temperature trolley furnace. High temperature trolley furnace is a very important equipment in the manufacturing industry. It also has the advantages of energy saving and environmental protection. With the development of science and technology, the requirements for the production of parts and components are constantly improving, and the process technology of high-temperature trolley furnace is also constantly improving. If you want to know more about high-temperature trolley furnace, you can call Kejia electric furnace for consultation.
English
简体中文
Русский язык
Français
日本語
한국어
Português
Español
Position:
E-mail:
Tell:
Whatapp:
Address:Room 1505, Building 9, No. 26 Dongqing Street, Zhengzhou High-tech Industrial Development Zone
Website navigation
