How to install a rotary tube furnace?
The following are the general steps for installing a rotary tube furnace:
1. Site preparation
- Select a dry, well-ventilated, level and stable installation location. Make sure there is enough space around for easy operation and maintenance.
- The installation location should be away from flammable, explosive items and strong electromagnetic interference.
2. Unpacking inspection
- Carefully unpack the equipment and check whether the tube furnace and its accessories are complete and whether there is any damage caused during transportation.
3. Install the furnace body
- Place the furnace body of the tube furnace in the selected location and use a level to ensure that the furnace body is level.
4. Connect the power supply
- Connect the appropriate power cord according to the power and voltage requirements of the equipment. Make sure that the power cord is firmly connected and meets electrical safety standards.
5. Install the rotating mechanism (if any)
- Follow the instructions in the manual to correctly install the rotating part and ensure that it is firmly installed, rotates flexibly and without jamming.
6. Connect the gas pipeline (if necessary)
- If specific gases need to be introduced during the work process, connect the gas pipeline to the gas inlet of the tube furnace and use seals to ensure that the connection is tight and there is no gas leakage.
7. Install temperature sensor and control system
- Accurately install the temperature sensor and connect it to the control system. Perform preliminary debugging and calibration to ensure the accuracy of temperature measurement and control.
8. Safety device inspection
- Check whether the safety devices such as safety valves and explosion-proof devices are installed correctly and can work properly.
9. Initial startup test
- After the installation is completed, perform the initial startup test. Set a lower temperature and a shorter running time first, and check whether the various functions of the equipment are normal, including temperature control, rotation operation, electrical system, etc.
10. Training and operation guide
- After the installation is completed, the operator should read the operation guide carefully and familiarize himself with the operation process and precautions of the equipment.
It should be noted that during the installation process, the installation instructions and relevant safety specifications provided by the manufacturer must be strictly followed. If you have any questions or uncertainties about the installation process, you should contact the manufacturer's technical support staff for help in a timely manner.
English
简体中文
Русский язык
Français
日本語
한국어
Português
Español
Position:
E-mail:
Tell:
Whatapp:
Address:Room 1505, Building 9, No. 26 Dongqing Street, Zhengzhou High-tech Industrial Development Zone
Website navigation
